JuliusTweezer
New member
- Joined
- Sep 3, 2020
- Posts
- 2
I have a 1993 Fleetwood Bounder with a Chevy has engine. I have power to all of the four switches except the left side of the ignition relay which powers fuses f6-f12 which all have to do with the ignition. I can get it running if I take a jumper wire from the right side to the relay to the smaller bolt that controls the switch on the same relay. That?s obviously not a fix. The person who had this before had a jumper wire with a fuse running from the top right of the circuit board to the bottom left of the board to power it and allow it to start and run. That same fuse would blow from time to time. So I?ve been trying to figure out what was the original problem which made them jump the board. Any help would be greatly appreciated.