Fiesta Bob
New member
- Joined
- Apr 19, 2019
- Posts
- 2
Hi to ALL,
I have a 2006 Fleetwood Fiesta 32s, single living room slide 12'. It has an over the frame Lippert electric slide (rack and pinion). When the slide is pulled in it fails to seal on the top left corner, all other corners pull in and seal properly. I'm left with an approximate 1" gap on the subject corner. I have consulted with Lippert tech support and they believe the problem was the slide synchronization adjustment or the vertical wall adjustment. I have made these adjustment with a high level of confidence that they were done correctly, but with NO POSITIVE results. I am looking for anyone who might have had a similar issue and was able to get it resolved, or someone who might have an idea, as I am out of them.
I have a 2006 Fleetwood Fiesta 32s, single living room slide 12'. It has an over the frame Lippert electric slide (rack and pinion). When the slide is pulled in it fails to seal on the top left corner, all other corners pull in and seal properly. I'm left with an approximate 1" gap on the subject corner. I have consulted with Lippert tech support and they believe the problem was the slide synchronization adjustment or the vertical wall adjustment. I have made these adjustment with a high level of confidence that they were done correctly, but with NO POSITIVE results. I am looking for anyone who might have had a similar issue and was able to get it resolved, or someone who might have an idea, as I am out of them.
