canuckrv
Well-known member
- Joined
- Apr 1, 2013
- Posts
- 464
I need to replace the roof on our motorhome, and was wondering if anyone has used Superflex Roofing instead of EPDM? It seems to be the better choice?
here is the description.
Lightweight - get better gas mileage (.165lbs/sq ft. compared to EPDM at .29 lbs/sq ft.)
Does not chalk (won't turn side of unit gray)
Stronger - won't puncture as easily like EPDM
Can be easily repaired
Stretches easier so you can get a perfect tight fit
Better traction with a non-skid surface
Color is same throughout substrate
Will not shrink or crack (100% solids sealant)
.028 Thick
I was also thinking of building curbs for all the vents and ac to sit on I was thinking of using a 1X6 and ripping an angle on one edge to the center for that would give you a flat for the vent to sit on and a good transition to the roof, and thoughts on this?
here is the description.
Lightweight - get better gas mileage (.165lbs/sq ft. compared to EPDM at .29 lbs/sq ft.)
Does not chalk (won't turn side of unit gray)
Stronger - won't puncture as easily like EPDM
Can be easily repaired
Stretches easier so you can get a perfect tight fit
Better traction with a non-skid surface
Color is same throughout substrate
Will not shrink or crack (100% solids sealant)
.028 Thick
I was also thinking of building curbs for all the vents and ac to sit on I was thinking of using a 1X6 and ripping an angle on one edge to the center for that would give you a flat for the vent to sit on and a good transition to the roof, and thoughts on this?