cic317
Well-known member
Hi everyone,
new to the boards & TC, just bought a used 2011 Adventurer 80, all checked out ok when we did the walk thru, today doing some odds & ends, winterizing & fired up the wall furnace. ran fine, but after shutting thermostat down, the fan will not shut off. I thought it was just a cool down mode, but 2 hours later still going. Ended up pulling fuse.I have gone thru the manual but it's no help. Hoping someone might have had the same issue.
the unit is a Suburban NT-16SE
thanks in advance !
new to the boards & TC, just bought a used 2011 Adventurer 80, all checked out ok when we did the walk thru, today doing some odds & ends, winterizing & fired up the wall furnace. ran fine, but after shutting thermostat down, the fan will not shut off. I thought it was just a cool down mode, but 2 hours later still going. Ended up pulling fuse.I have gone thru the manual but it's no help. Hoping someone might have had the same issue.
the unit is a Suburban NT-16SE
thanks in advance !