John Canfield
Site Team
Just be sure the self-driller is stainless!
wakino said:I did check the website for 'Eternabond' but it seems like it would be harder to remove next time I have to redo the seams.
Is going the 'Eternabond' route a Superior method compared to the 'Dicor Caulking' way.
wakino said:Thanks John for reply. This is the first time resealing my roof. Does the following sounds like proper procedure:
Ya, John you're right about this. I got my feedback at the 2008 GNR from the Vectra owner next to me who had his roof radius and top of front/rear caps repainted at CDI during the rally. He said that CDI painters in 2003/2004 were told to limit the spraying on the top corners to reduce the amount of overspray problems they were having. So we only got a light layer of clear coat.John Canfield said:.......
There was a finish issue I believe heard about on the caps - I think it was a due to the clear coat being applied too lightly. If I remember the story correctly CDI (paint contractor) didn't have an appropriate work platform that placed the painter above the work, the caps in this case. However, I'm not certain my memory is accurate :-\