Where to Check Power Steering

[nitrohog1]

Folks, I need some help from someone that knows where to check the Power Steering Fluid on a 2011 Winnebago Tour QD floor plan. I have searched everywhere other than removing the engine hatch in the rear bath.

Thanks,
Herbie

edit by staff - changed message icon to topic solved

 

[afchap]

Cummins or Cat?  On my 8.3 Cummins, the power steering is run by the large hydraulic oil canister toward the left side inside the engine access door. 

 

[Henry J Fate]

Yup. If its the freightliner chassis it is in the rear engine access panel.

 

[John Canfield]

Mine is in plain sight (rear access as others have mentioned) but I have a side radiator. Yours should be back there as well.

 

[nitrohog1]

My engine is a 8.9 Cummins Rear Radiator when I opened the Engine Access door at the rear of the Coach the only thing  I could check or add was engine oil, Trans fluid or coolant. I will look again maybe it is hidden behind something. Do any of you Folks who replied have a Winnebago Tour or Itasca Ellipse with the QD42 floor plan?

I greatly appreciate your help,
Herbie

 

[Henry J Fate]

https://www.google.com/url?sa=t&source=web&rct=j&url=https://winnebagoind.com/resources/manuals/pdfs/Operator2011/11Tour.pdf&ved=2ahUKEwjJ8vb26sLpAhWEVt8KHeF5AAcQFjAAegQIAxAB&usg=AOvVaw00Y4RsgFWXlcl43uIjf_BS

Section 3 page 22 should help.

 

[afchap]

Actually at the top of page 23.

 

[nitrohog1]

Henry, thanks for the section and page#. Everyone was correct it is on the left hand side of the Engine Compartment and is not readily visible. It is mounted behind the Tail Light assembly partially obscured by a metal plate. You have to reach your hand over the plate to feel the cap. I want to thank everyone for their replies and helping me solve my problem.


Thanks,

Herbie