I'm old but new to the forum, new to tent trailers, and haven't got a clue on making battery connections. I bought a pristine 2004 Rockwood Premier 2576G E-Z Glide that had no battery. I bought a deep cycle battery to power the interior lights, water pump, gas detector, and furnace but haven't the faintest idea which wire connects to each of the terminals. All systems work fine on shore power. I have four wires to connect to the battery terminals.
1) Heavy gauge white wire with no color at the crimped connector
2) Heavy gauge red wire with red crimped connector (this first connects to an approximately 1.5" x 1.5" x .75" box with 4 screw studs on it that then connects to the battery)
3) Heavy gauge black wire with red crimped connector
4) Light gauge black wire with blue crimped connector
Could someone please help me. Which wire(s) goes to the + and which to the -? Additionally, what is that little box on # 2? If you can help I don't fry myself and I be camping without shore power. Thanks much for saving my life!
1) Heavy gauge white wire with no color at the crimped connector
2) Heavy gauge red wire with red crimped connector (this first connects to an approximately 1.5" x 1.5" x .75" box with 4 screw studs on it that then connects to the battery)
3) Heavy gauge black wire with red crimped connector
4) Light gauge black wire with blue crimped connector
Could someone please help me. Which wire(s) goes to the + and which to the -? Additionally, what is that little box on # 2? If you can help I don't fry myself and I be camping without shore power. Thanks much for saving my life!