Changing TT entry door locks

The friendliest place on the web for anyone with an RV or an interest in RVing!
If you have answers, please help by responding to the unanswered posts.


New member
May 3, 2019
Good evening all!
I need to replace the entry door lock on the new to us TT. Went to CW, bought one that was supposed to work, but it seems too big. No instructions, and I can't seem to find any online.
The model purchased is AP products # 013-534. It's supposed to fit in any opening 2 3/4 x 3v3/4, which I have, but I have no idea how to make this thing fit. Any ideas? TT is a 2003 X-treme Lite by Sun Valley, and the opening after removing the old handle is the correct dimensions.
Thank you in advance for your input!
That lock set is from Bauer Products - suggest you contact them for instructions.

You didn't tell us anything about why it doesn't seem to fit, so difficult to offer suggestions. The basics are that you need a 2-3/4 x 3-1/4 rectangular opening, plus the slot in the door edge for the latch. You unscrew the bolts that hold the face of the latch assembly, slip the innards into the opening, and then bolt the face plate back on.

It appears you have the Bauer BP-8RV lock.  This page at Bauer has links to a cutout drawing and an assembly drawing that may help.
Thank you to everyone for the assistance. I was able to get the new lock in and working. Hooray!
Have a great weekend all!

Latest posts

Forum statistics

Latest member
Top Bottom