Coiled cable for toad

[wb6kwt]

I've been searching for a 6 pin round to a 4 pin flat coiled cable to replace the straight cable I have now. I've searched the forum as well as the web and can't seem to find what I need, any one know where to purchase one?

Thanks,

Bob

 

[Jim Godward]

You might try Demco, http://www.demco-products.com/towbars/towbaraccessories.html, as they have some coiled ones in their Towbar accessory section.  Not sure if they have what you want but maybe you can modify one.  I put a 7 pin connector for the MH end and a 6 pin round on the car end.

Anyway contact them for a local supplier and see what they can do.

 

[99WinAdventurer37G]

Here's the coiled cord; http://www.etrailer.com/Accessories-and-Parts/Hopkins/HM47055.html?feed=npn&gclid=CPCzlYuHgrMCFYw-MgodjRQAEw

And here is the adapter you'll need for one end; http://www.etrailer.com/Wiring/Hopkins/HM47320.html

I believe that one will work, but a call to them may help make sure you get the right parts.

 

[Kim (skyking4ar2) Bertram]

You might consider using a 6 pin round to 4 pin adapter http://www.drawtite-hitches.com/products/6_Way_Round_Pin_to_4_Flat_Adapter_with_LED_Light,LM-47325, then use a coiled 4 wire to the toad. Not as elegant but possibly more available with making the whole business yourself.

 

[wb6kwt]

Thanks for your inputs, looks like an adapter is the only answer without modifying a cable. I'll check locally for an adapter before ordering one.

Bob