Dinette table wobbles

[SUZYQT]

My new dinette table wobbles while we are sitting at it.  What should I do to make it more stable?  It is supposed to make a bed but we will never use it for that.  [There is no way an ordinary size person would fit there.]

 

[olly72]

There are (on mine) two locking levers.  One on top one on bottom.  If they are not seated correctly and tight the table will wobble.

 

[Chuey]

Did you fix the wobble?

 

[WILDEBILL308]

With out more information it is hard to say what the problem is. Do you have a leg on the end of the table/away from the wall? Is this loose? You might be able to turn it and tighten up the screw.
Bill

 

[elwood58]

Check that the mounting strip on the wall end of the table is secured tightly. There are 3-4 screws that have a tendency to loosen up.

 

[bigbob70]

Don't know if you have the same setup as mine...My table was also loose so I had to unscrew the circular metal mount on the floor and rotate it to a new position then rescrew it back to the wooden floor...

Seems the old wooden screw holes that secured the metal plate to the floor over time had lost their grip..

A simple repositioning of the screws did the trick

 

[John Canfield]

The OP hasn't checked into the forum in six weeks....

 

[Rene T]

The OP hasn't checked into the forum in six weeks....

Hate it when that happens.  :

 

[OLDRACER]

Still under the table trying to find out what is loose?

 

[SUZYQT]

;D  Great suggestions, I just haven't had time to try them yet.