HairyWBush
Member
- Joined
- Jul 1, 2018
- Posts
- 18
I need to replace the whole shower, kitchen sink, and bedroom sink. The first 2 are the most important right now, and I haven't started the look on the other sink.
Anyway, my shower is a corner piece, with a 6 side shower pan. like this: https://www.haylettautoandrv.com/console/photos/inventory/large/7bc4dc1ea08ab68.jpg
The pan has 6 sides like this https://www.ebay.com/itm/Lippert-209797-White-Better-Bath-Neo-Angle-RV-Shower-Pan-Center-Drain-9-5-Rise/132054331834?hash=item1ebf0d31ba:g:EeEAAOSw44BYbRxv
Mine does not have the door but I'm curious what it's for?
Now the issues. First, the dimensions I have for the surround are: 33 1/2 x 33 1/2 x 65 1/16
What comes up for this are these typical units: surround: https://www.rvautoparts.com/306205-Lippert-Components-Shower-Surround-1-Piece-Design_p_33475.html
An extra 3 inches in height won't hurt anything, but I want to know if my rivet holes will line up?
I am having trouble interpreting the dimensions for the base. It doesn't list where they get these dimensions from. I measured the front sides at 15 1/2 x 25 x 15 1/2. The back middle side measured 10 3/8. I can't get an accurate reading from the other 2 due to the glass frame.
I also cannot find one with a center drain. My pan's drain is in the middle and center of the pan. I only see front and center.
That's that for the shower. My sink, I also cannot find an exact replacement. At the face of the sink, I have a length of 24 5/8 and depth of 19 5/16. The best I found is thishttps://www.ebay.com/itm/Lippert-209586-3-Holes-Better-Bath-Double-RV-Sink-Plastic/162345790488?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2055119.m1438.l2649
The seller tells me the Actual size: 24 3/8" W x 18 7/8" D
Even this isn't right https://www.rvautoparts.com/209404-Lippert-Components-Sink-Double-Kitchen-Sink_p_15719.html
But that one is almost identical.
I tried measuring the countertop hole underneath and it seems I will still have room for the sink, but not only am I losing size, my other concern then is the piping placement.
This is out of a 2005 KZ Sportsmen. After talking to RVautoparts, Lippert, and no success in getting in contact with KZ after many attempts, I am writing this thread.
Anyway, my shower is a corner piece, with a 6 side shower pan. like this: https://www.haylettautoandrv.com/console/photos/inventory/large/7bc4dc1ea08ab68.jpg
The pan has 6 sides like this https://www.ebay.com/itm/Lippert-209797-White-Better-Bath-Neo-Angle-RV-Shower-Pan-Center-Drain-9-5-Rise/132054331834?hash=item1ebf0d31ba:g:EeEAAOSw44BYbRxv
Mine does not have the door but I'm curious what it's for?
Now the issues. First, the dimensions I have for the surround are: 33 1/2 x 33 1/2 x 65 1/16
What comes up for this are these typical units: surround: https://www.rvautoparts.com/306205-Lippert-Components-Shower-Surround-1-Piece-Design_p_33475.html
An extra 3 inches in height won't hurt anything, but I want to know if my rivet holes will line up?
I am having trouble interpreting the dimensions for the base. It doesn't list where they get these dimensions from. I measured the front sides at 15 1/2 x 25 x 15 1/2. The back middle side measured 10 3/8. I can't get an accurate reading from the other 2 due to the glass frame.
I also cannot find one with a center drain. My pan's drain is in the middle and center of the pan. I only see front and center.
That's that for the shower. My sink, I also cannot find an exact replacement. At the face of the sink, I have a length of 24 5/8 and depth of 19 5/16. The best I found is thishttps://www.ebay.com/itm/Lippert-209586-3-Holes-Better-Bath-Double-RV-Sink-Plastic/162345790488?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2055119.m1438.l2649
The seller tells me the Actual size: 24 3/8" W x 18 7/8" D
Even this isn't right https://www.rvautoparts.com/209404-Lippert-Components-Sink-Double-Kitchen-Sink_p_15719.html
But that one is almost identical.
I tried measuring the countertop hole underneath and it seems I will still have room for the sink, but not only am I losing size, my other concern then is the piping placement.
This is out of a 2005 KZ Sportsmen. After talking to RVautoparts, Lippert, and no success in getting in contact with KZ after many attempts, I am writing this thread.