Ready2roll
Member
Now the bad.....how did I wind up here
We brought the RV back towards our house to show a few friends our RV purchase. After all the looking around it was time to puller in and close it up. This model has 3 slides and all deployed normal. The passenger side slide had a peculiar sound when unlocking put slid out just fine, going back in not so good. Of the slides out.. 2 came back in fine the third slide retracted okay but when we went to lock it in place the locking mechanism had a different sound, a little more deeper. Instead of a winding sound, it was just short of a grinding sound. Now everytime before the Locking device would just stop when it completed locking..about 7 sec...this last time it went for double that, and at that point I stopped pushing the button... Now it seems to have no power... no unlocking, or slide movement....on the passenger side slide only. The other slides are working fine, and no other electrical issues.
Question: Where is the breaker/fuse for the passenger side slide? I have checked everywhere that I know of..
I reset the Digisystem and still no power to that particular slide. i removed 2 screws and pushed the reset button.
The Parking brake was set, the other slides worked as requested.
Question: Where is the locking device located. There is a black cover in one of the over head bins, in the center of the slide, is that the locking device?
Question: Is there any serviceable fuses under that cover?
Question: Are the lock paramount to moving the RV?
Thanks in advance for all the people that reply!
We brought the RV back towards our house to show a few friends our RV purchase. After all the looking around it was time to puller in and close it up. This model has 3 slides and all deployed normal. The passenger side slide had a peculiar sound when unlocking put slid out just fine, going back in not so good. Of the slides out.. 2 came back in fine the third slide retracted okay but when we went to lock it in place the locking mechanism had a different sound, a little more deeper. Instead of a winding sound, it was just short of a grinding sound. Now everytime before the Locking device would just stop when it completed locking..about 7 sec...this last time it went for double that, and at that point I stopped pushing the button... Now it seems to have no power... no unlocking, or slide movement....on the passenger side slide only. The other slides are working fine, and no other electrical issues.
Question: Where is the breaker/fuse for the passenger side slide? I have checked everywhere that I know of..
I reset the Digisystem and still no power to that particular slide. i removed 2 screws and pushed the reset button.
The Parking brake was set, the other slides worked as requested.
Question: Where is the locking device located. There is a black cover in one of the over head bins, in the center of the slide, is that the locking device?
Question: Is there any serviceable fuses under that cover?
Question: Are the lock paramount to moving the RV?
Thanks in advance for all the people that reply!