Resetting ?change eng oil? reminder in 8.1 Vortec

The friendliest place on the web for anyone with an RV or an interest in RVing!
If you have answers, please help by responding to the unanswered posts.
From memory.  Turn the ignition to the "on" position. Press the accelerator to the floor three times in five seconds.  Turn the key to the "off" position, and then back to the "on" position. The light should be off.
 
Instructions for resetting that should be in your owners manual.  If you don't have access to one, it can be found online.  I believe this is the link:  https://cdn.dealereprocess.net/cdn/servicemanuals/chevrolet/2005-silverado1500.pdf
 
Paul 1950 said:
From memory.  Turn the ignition to the "on" position. Press the accelerator to the floor three times in five seconds.  Turn the key to the "off" position, and then back to the "on" position. The light should be off.

Right close.. They told me to turn off, floor it 3 times in 5 seconds as above. then turn off again and START it. do not know if you need to actually start it or just turning on is enough.

But it worked for me.

I sometimes tll the story of 3 Customer service calls

Hughesnet.. 7 hours no joy
Xantrex  15 minutes RMA within 2 and some helpful info for the rest
Workhorse. this issue. less than one minute. SOLVED.
 

Latest posts

Forum statistics

Threads
131,917
Posts
1,387,440
Members
137,672
Latest member
Davestic
Back
Top Bottom