airborne_spoon
Well-known member
I have a 2022 bushwhacker 10HD and I did a LiFePO4 upgrade ages ago 200Ah from Ampertime and I have 200w solar to charge it off a victron 100/20 and it works perfectly stopping at 14.00v to 14.20v when it's charging.
However when I plug into shore power the converter wants to charge the battery to 14.5v and I don't like that.
I have a Wfco WF-8735P and one of the fuses is labeled as reverse battery protection fuse 40A and if I pull it the battery doesn't charge.
Is it fine to do this and just leave that thing pulled out always? Seems like a bad idea. How to I stop shore power from charging my battery?
I need shore power to run my AC, be it my generator in the woods or a plug at a campground I need AC it's gonna be hot soon.
However when I plug into shore power the converter wants to charge the battery to 14.5v and I don't like that.
I have a Wfco WF-8735P and one of the fuses is labeled as reverse battery protection fuse 40A and if I pull it the battery doesn't charge.
Is it fine to do this and just leave that thing pulled out always? Seems like a bad idea. How to I stop shore power from charging my battery?
I need shore power to run my AC, be it my generator in the woods or a plug at a campground I need AC it's gonna be hot soon.