Kaputnick
Active member
Our water pump continues to run when turned on. I have checked all valve positions (like when filling tank) and have looked at the filter which was clean.
No leaks and plenty of pressure on city water. When running I can pinch the supply side with no effect such change in tone etc. I have not check the out but there is no or very little output at the taps.
This problem seems to have started while on a fair slope with a low tank buy turning on the pump with low flow. Not sure how this would effect it but I would appreciate any thoughts on trouble shooting and or potential problems.
Thanx
No leaks and plenty of pressure on city water. When running I can pinch the supply side with no effect such change in tone etc. I have not check the out but there is no or very little output at the taps.
This problem seems to have started while on a fair slope with a low tank buy turning on the pump with low flow. Not sure how this would effect it but I would appreciate any thoughts on trouble shooting and or potential problems.
Thanx