TheS1R
Member
[list type=decimal]Sanibelview said:TheS1R, can you go into detail what your installer accomplished. Was the original Axxess unit used or is what you call the ASWC-1 a new unit. Haven't looked but is getting to the back of the head unit pretty involved. Appreciate your feedback.
After rereading this thread, looks like I need a good audio installer, this is above my pay grade and sure don't want to take a chance and sure wouldn't trust CW.
[*]Original ASWC-1 reused (aka "the Axxess radio volume control module" in Winnebago terminology). (reference http://www.metraonline.com/part/ASWC-1)
[*]New Metra harness used.
[*]All connections to Winnebago harness disconnected and isolated behind head unit (i.e., Molex connector behind kick panel no longer "live").
[*]ASWC-1 installed using only the Metra harness behind the head unit to the CANbus access point using soldered connections.
[/list]
Total job took two hours, but the owner estimates that they could now repeat in an hour. They were meticulous as far as removing/reinstalling the dash panels in order to pull the head unit to properly install the ASWC-1.
I added a picture of what you find behind the head unit.