benmack1
Well-known member
I have a 97 pace arrow 36S. It has hydraulic leveling jacks which are made by the HWH corp I believe (4 jack, electric over hydraulic operation). I usually store the rig on the jacks so it is level for the fridge and doesn't flat spot my tires. I try to drive it at least once a month to keep everything working. The last couple times I have retracted the jacks, the 'jack's up' light doesn't go off on the controller and when I release the emergency brake an annoying red llight on the dash and beeping sound persists. Usually this goes off after a minute or two once I move the rig, but is taking longer all the time to realize the jacks are retracted. Yesterday, I made my normal 10 mile around the block trip and the darn thing stopped beeping when I pulled back into the driveway. My son and were ready to go crazy with the sound. Note before someone asks, the jacks are all the way up so there doesn't appear to be a mechanical problem of any type. I assume this is an electrical sensor or contact that is corroded so does anyone have advice on where to start looking for this problem or is it something else I am not appreciating.
Thanks!
Thanks!