Hello, all! I have two T105s set up in series on our camper trailer. Trojan's specs state that it needs to be charged at:
Absorption 14.8V
Float 13.2V
Equalize 15.5V
The trailer's existing WFCO WF8955 converter only charges at:
Absorption 13.6V
Float 13.2V
Does not seem to have an equalize option (though it does bulk at 14.4V)
I've read many forms that discuss various chargers and converter/chargers, but none of them seem to get to the Trojan's spec'd 14.8V absorption recommendation. The often-cited PD9260CV only boasts 13.6V "normal" (which I presume is their word for "absorption"). Another popular option, the Iota DLS-45 with IQ4 only has a 14.2V absorption rate.
The only charger I've seen that can actually get close to the recommended 14.8V is the Magnum products which get to an absorption of 14.6V.
Is there a charger or converter that can actually get to an absorption of 14.8V? If not, what voltage should one shoot for if using the T105s? I don't think my WFCO converter is close enough, but correct me if I'm wrong.
Thanks!
-Will
Absorption 14.8V
Float 13.2V
Equalize 15.5V
The trailer's existing WFCO WF8955 converter only charges at:
Absorption 13.6V
Float 13.2V
Does not seem to have an equalize option (though it does bulk at 14.4V)
I've read many forms that discuss various chargers and converter/chargers, but none of them seem to get to the Trojan's spec'd 14.8V absorption recommendation. The often-cited PD9260CV only boasts 13.6V "normal" (which I presume is their word for "absorption"). Another popular option, the Iota DLS-45 with IQ4 only has a 14.2V absorption rate.
The only charger I've seen that can actually get close to the recommended 14.8V is the Magnum products which get to an absorption of 14.6V.
Is there a charger or converter that can actually get to an absorption of 14.8V? If not, what voltage should one shoot for if using the T105s? I don't think my WFCO converter is close enough, but correct me if I'm wrong.
Thanks!
-Will