This is all new to me so I will do the best to explain.
The info panel says the LP is full, the tank gauge says 1/2. I turned on the valve and tried to light the stove, no gas, no gas smell or noise.
The fridge does not switch to LP.
The front furnace fan runs non stop and does not does not heat.
I knew the back thermostat was broken and I was going to replace it so no way to test that one.
The LP detector was unplugged so I plugged it back in and I now have a green light on the panel but still no LP in the coach.
I am heading out with a multi meter to see if there is voltage at the cutoff valve.
I may remove the valve and see if there is LP in the tank.
What else should I look for?
Why is the blower staying on? What can I look at to get it to stop blowing non stop?
Owners manual says the furnaces are Atwood 8535 models.
1999 Tradition
The info panel says the LP is full, the tank gauge says 1/2. I turned on the valve and tried to light the stove, no gas, no gas smell or noise.
The fridge does not switch to LP.
The front furnace fan runs non stop and does not does not heat.
I knew the back thermostat was broken and I was going to replace it so no way to test that one.
The LP detector was unplugged so I plugged it back in and I now have a green light on the panel but still no LP in the coach.
I am heading out with a multi meter to see if there is voltage at the cutoff valve.
I may remove the valve and see if there is LP in the tank.
What else should I look for?
Why is the blower staying on? What can I look at to get it to stop blowing non stop?
Owners manual says the furnaces are Atwood 8535 models.
1999 Tradition