Gary RV_Wizard
Site Team
So I'm looking at the 2500 Silverado WT, with trailering package, but they are showing me a 6.0L V8 gas engine. 360 HP 380 Torque. Of course the salesman is adamant that it won't be an issue with a 13,000# towing capacity but I'm still not sure. The drop in torque is so drastic from the deisel model. Any thoughts?
Torque vs Hp is mostly misunderstood, even within the gearhead community. There is a pervasive notion that more torque is more important than more horsepower, but that is way oversimplified and often just plain wrong. A 360 hp gas engine will pull/push/carry exactly as much as a 380 hp diesel, regardless of torque values. Hp = torque * Rpm/5250, so the higher torque of the diesel allows it to operate at lower rpms to produce the same amount of power. If the diesel has twice as much torque for the same Hp, then it runs at half the Rpms to produce the same Hp.
Therefore the noticeable difference between the gas & the diesel (besides price) is the rpm at which the full rated horsepower is available. That gives the diesel a feeling of more immediate power, i.e. more responsive to heavy demand. It also means that a diesel does its work at lower Rpms, so suffers less friction wear on internal moving parts. It also means that drivers averse to hearing the gas engine "scream" at higher rpms will be more comfortable about using the full Hp. But if the gas and diesel have the same rated Hp, the available power will be the same.
All that said, I like the diesel for its low end performance, which is ideal for towing or carrying heavy loads. Whether it's worth the extra money (even assuming you get it back eventually), is a tougher question. The 6.0L gas V8 is still adequate for the task, so getting the diesel is a discretionary expense.
This article is helpful in comparing the 6.0LV8 with the Duramax diesel:
http://www.trucktrend.com/cool-trucks/0712dp-chevy-duramax-lmm-60l-vortec-ly6-gas-engine/