Recent content by madhouse4ever

2008 Destination 39W. Have ave a 4 in 1 guage for temp, oil pressure, and primary & secondary air pressure that has a leak in the secondary pressure guage. There is an O-ring in the nipple that the air line attaches to that has slipped inside or broken and caused the line to leak. The entire...

We were in for service at dealer and while replacing our air filter they noted our exhaust heat wrap was deteriorating however, they didn't do any exhaust work. So, we have been trying to find a place to get the pipe replaced. Freightliner doesn't do exhaust work and can't even order the part...

Thank you to all who replied on this, all good info and we'll be on the computer researching tonight. What a great bunch of folks on this forum! :) :) Sincere thanks again!

Wondering if anyone out there has replaced the "mesh" portion of the exhaust system on a Cummins 340? Had our unit in for service at the dealer and they pointed out that our mesh is rotting away and needs replacement but they don't do that. They referred us to Freightliner and they said they...

Kwikee Level Best

Experiencing the audible alarm for Jacks Down while rolling along at 65mph is a heart stopping moment for us and it's happened a few times now. Dealer service has told us that the "jack is bad,  it's leaking and running off and there isn't a reseal kit made for it, so replacement of jack is...

Thanks John, that did the trick! Hubby also put a long blade screwdriver in there and gave it a gentle twirl. We're dripping from the drain again. Many thanks!

Our heatpump is working fine, however we have a drip which has started from a different area than the normal condenser drip. Have checked to make sure it's not coming from something else, and verified it's dripping when the air is running. Think this is something we should be concerned about...

Hate to sound like a real wuz, but, I'm wondering how you folks who have water softeners handle the water drainage when regenerating the unit. We have the On the Go double size, which requires 30 minutes of water running out to regenerate. Even though the stream is just enough to clear the body...

Sorry to hear of the issue in manufacturing on your slide. Wow! Things happen. We're going in for slide adjustment to Winnebago and they'll let us know about the rollers. We've consistently had aluminum shavings present on that side since we had the tile flooring installed. Who knows whats going...

Thanks Gary, we've tried those. Just not heavy duty enough for under that frig slide. Appreciate your input. You have a good one.

Good evening, anybody know of a good tile floor protector for under the slides? We need a sturdy protector on our full wall roller slide that houses our frig, need 6 under there. Anybody use these protectors or able to recommend a product.

We have a 2008 39W Diesel Pusher that we bought used in 2013 with 20k miles. We have been very happy with the coach. We refer to it as a European look inside, sleek. We had the salon and bath updated with tile flooring, the dinette replaced with a credenza desk unit, table  and chairs, 40" smart...

Ed, thanks for your input too. We are getting ready to check the hose connection at the washer. We think the washer may have to be pulled for that as well, if it doesn't we'll consider this to be one lucky day! Larry had also wondered about the mixing valve. We'll keep you all informed, as for...

That will have to be the next step Rene T because the water is coming out of the spigot just fine. Clearly the problem is in the hose. Has it ever worked right? That is a good question. This is our 3rd winter in this rig and I think it's been this way since we bought the unit. I always wondered...