You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
Recent content by Gordiegaffer
The friendliest place on the web for anyone with an RV or an interest in RVing!
If you have answers, please help by responding to the unanswered posts.
i had to replace the motor unit and the controller the worst part was the 3 hr it took to remove the pin in the arm if i had to do it again i would find a puller to remove the the pin.
Who made the fly rod any repair to the blank will change the action of the rod check with the manufacturer they may replace the rod. Any fix will ruin the rod. The bait casting rod use a medium super glue and let it dry on its own don't use an accelerator it will make the glue brittle.
Kurig when i have shore power french press when no power. I have a stainless french press and a hand grinder no power needed remember to let the coffee steep for 4 min than press it works great.
I have an old duel band that i mounted on my ladder ran a ground to the frame and ran the coax under the rv and in through the fire wall through one of the rubber grommets for the wiring. works great
If you have a heater bypass, bypass the heater open the pressure valve on the heater remove the plug and drain the heater. Open the valve on the on board tank. Set the air compressor to 40 psi and open the hot than cold on the outside shower till you get air, also step on the toilet till you...
i do a chicken or beef with rice very easy i tried to use saute and than pressure but i got a burn notice so now i cut up the chicken into 1 " pieces and cut up an onion and add mushrooms add to a 1 gal zip lock bag add olive oil and red wine vinegar and your choice of spices. i use Italian mix...
My outside radio has no power i have looked behind the radio under the mess of wires under the fridge i don't see a fuse any other places to look for the fuse i have looked at the wiring diagrams and i don't see fuses this is on a 2006 Winnebago 29 R
I second the bridge i would want to make that turn of Jefferson on snake into the tunnel. it is also closer to Lake Erie enjoy have your passports and remember no guns. I would get my food esp fresh after you cross into Canada somethings the will not let you bring in.
Good carpenters glue or epoxy will work better than Gorilla Glue. Gorilla Glue expands and can push the wood apart it should also be put on one surface and wet the other. Golf tee and Tightbond works best.