Recent content by quadrider

Thank you for the help. I checked the shunt and realized the ground cable from the charger should be hooked up to the shunt and i had it on the battery. The other thing is the renogy 500 amp gauge is more software than a meter. i thought it used the battery voltage to determine the battery is...

Yes its a Renogy 500A Battery Monitor with Shunt. The voltage on the battery meter was the same as on the multimeter. I’ll put the battery on charge tomorrow for 5 to 6 hours and then retest with a multimeter. since the battery meter and the multimeter were showing the same voltages during...

Progressive trouble shooting says to disconnect the negative wire at the terminal and measure voltage output. It says it should be around 14.6 give or take .3 and it shows 14.6. When i connect the wire it shows 13.6 volts at the terminals. My 400 amp battery guage shows 340 amps available. I...

I have a 400 amp hour lithium battery with a progressive PD9160ALV 12V Lithium 60 amp charger. The charger is right next to the battery with 12 inch cable run and 2 Gauge wiring. When I unhook the ground wire from the charger, it shows 14.6 V but as soon as I connect the wire, it shows 13.6 V at...

I check the generator tonight and it ran fine at full throttle. I haven't done anything with the generator but it has started to work normal again. I ran both ac for one hour with no problem. Could a hot day cause the generator to act up . The temperatures during the camping trip was 35? Celsius...

Thanks darsben for the tip on the signature.

I ran the front AC with nothing else on for 3 hours and the generator had no problem. I turn off the front AC and turn on the rear AC and ran it for 3 hours with no problem. As soon as I add a second load to the generator it starts to shake , the breaker on the generator trips and the generator...

I have 1989 bounder with onan 6500 watt gen Went camping this weekend and the the onan kept tripping one of the breakers on the generator. Before I could run two heavy load items off the generator. I could run both ac at once or i could run one ac and something else that draws lots of power...

I have and older bounder and mine works the way Gary said. I have 3 position on the switch off/front/rear. When on front the ac will work on the front on shore or generator.  When on the rear both ac will work on generator but only the rear will work on shore. In the off position neither ac will...

MEMBERSHIP AND CANCELLATION POLICY10, 11, 12 Membership is subject to cancellation by either party at any time for any reason, upon written notification. The cancellation of a membership includes the Member, Associates, Extended Family Members and all other individuals eligible for benefits...

I came home today to find a letter that good sams is removing me from there program.  I have been a member for 8 years with them and during the 8 years I think I have use them twice overall and niether of them was for my RV.  This year we have had two breakdowns one was for my RV and one was for...

The kit came with dvr, 4 camera, 4 50 foot cable bnc connectors and power supply install was about 5 hour With a friend working at a normal pace. The video cables had the power cable tie in with it so it was one cable per camera with two connectors. I mounted the dvr on the dash and the 13 inch...

Thx for info the daughter decided to tent for this trip and the rv is going to be repaired by a mobil repair guy.

I installed a regular home 4 camera dvr security system in our motorhome. The dvr came with two outputs for video. One VGA that i hook up to a  13 inch paper thin screen that i mounted on the dash and a hdmi out that i wired to my two TV in the RV. I have a hard time seeing the small mirror for...

Thank you all for the info going to try the repair and hope it holds for two times in and out.my rv dont have slideouts so i have 0 experience with slides.  If the repair doesnt hold and the slides are out is there a way to manually put the slides in to tow to a repair shop?