Got my new tires today. The 45-minute wait was about 44.5 minutes too long, because I had plenty of time to look at all the neat new wheels in the shop. My wheels have chrome trim covers that are getting rough looking and require valve extenders even on the outside tires in back. The front valves don't have extenders, but they're very difficult to reach through the covers. I'd like something attractive that is part of the tire rim, so I don't have a hubcap-like plate to remove or fool with. Then the only valve extenders I'd need would be for the inside tires in back.
What should I know before shopping for new wheels? Do all 6 have to be replaced usually, or just the 4 outside ones? Is there anything besides size that is an issue? I will also phone the MH manufacturer to find out if they have any requirements and recommendations.
Does anybody sell wheels or recommend websites, makes, models, styles that might be a starting point? Tire size is 225/75 R16, if that's of any use.
--pat
What should I know before shopping for new wheels? Do all 6 have to be replaced usually, or just the 4 outside ones? Is there anything besides size that is an issue? I will also phone the MH manufacturer to find out if they have any requirements and recommendations.
Does anybody sell wheels or recommend websites, makes, models, styles that might be a starting point? Tire size is 225/75 R16, if that's of any use.
--pat